Sony Repair Tips
Search: sony
Results: 20100
Results: 20100
| Make | Model | Symptom | Problem | Solution | By |
|---|---|---|---|---|---|
| SONY |
ITB3
|
No dial tone - replace fuse f1, p/n 1-532-866-11. | No dial tone. no line seize. | ||
| SONY |
SPP57
|
Intermittent no line seize or dial tone - replace l-613. | Intermittently would not seize line, or no dial tone. | ||
| SONY |
CDPC215
|
Skips after replacing spindle motor (adjust table height) | Skips in normal position but, plays o.k. on side. adjustmentswould not help. | ||
| SONY |
SSM920
|
Black spot in corner, replaced c802 | Horizontal output transistor q801 was shorted, and the fusewas open. after awhile on runing test a black spot in the top leftcorner appeared. moving the hor hold control the spot would not move, butlines sometimes appeared in the picture. | ||
| SONY |
KV27V55
|
Remote operation only from short distance, ic1001 | Remote only works at close range, and is affected bylight. it normaly should work up to at least 7m (21 feet). -soluion: replaced ic1001 on the h board. -hq comments: make sure the suffix on the chip ic-1001 ends in 51.chips ending with h9 have been f | ||
| SONY |
KV32TW78
|
Remote operation only from short distance, ic1001 | Remote only works at close range, and is affected bylight. it normaly should work up to at least 7m (21 feet). -soluion: replaced ic1001 on the h board. -hq comments: make sure the suffix on the chip ic-1001 ends in 51.chips ending with h9 have been f | ||
| SONY |
KV32TS46
|
Remote operation only from short distance, ic1001 | Remote only works at close range, and is affected bylight. it normaly should work up to at least 7m (21 feet). -soluion: replaced ic1001 on the h board. -hq comments: make sure the suffix on the chip ic-1001 ends in 51.chips ending with h9 have been f | ||
| SONY |
KV32TS36
|
Remote operation only from short distance, ic1001 | Remote only works at close range, and is affected bylight. it normaly should work up to at least 7m (21 feet). -soluion: replaced ic1001 on the h board. -hq comments: make sure the suffix on the chip ic-1001 ends in 51.chips ending with h9 have been f | ||
| SONY |
KV27TW78
|
Remote operation only from short distance, ic1001 | Remote only works at close range, and is affected bylight. it normaly should work up to at least 7m (21 feet). -soluion: replaced ic1001 on the h board. -hq comments: make sure the suffix on the chip ic-1001 ends in 51.chips ending with h9 have been f | ||
| SONY |
KV27TW77
|
Remote operation only from short distance, ic1001 | Remote only works at close range, and is affected bylight. it normaly should work up to at least 7m (21 feet). -soluion: replaced ic1001 on the h board. -hq comments: make sure the suffix on the chip ic-1001 ends in 51.chips ending with h9 have been f | ||
| SONY |
KV27TS36
|
Remote operation only from short distance, ic1001 | Remote only works at close range, and is affected bylight. it normaly should work up to at least 7m (21 feet). -soluion: replaced ic1001 on the h board. -hq comments: make sure the suffix on the chip ic-1001 ends in 51.chips ending with h9 have been f | ||
| SONY |
KV27TS32
|
Remote operation only from short distance, ic1001 | Remote only works at close range, and is affected bylight. it normaly should work up to at least 7m (21 feet). -soluion: replaced ic1001 on the h board. -hq comments: make sure the suffix on the chip ic-1001 ends in 51.chips ending with h9 have been f | ||
| SONY |
KV27TS29
|
Remote operation only from short distance, ic1001 | Remote only works at close range, and is affected bylight. it normaly should work up to at least 7m (21 feet). -soluion: replaced ic1001 on the h board. -hq comments: make sure the suffix on the chip ic-1001 ends in 51.chips ending with h9 have been f | ||
| SONY |
KV27XBR26
|
No closed caption on air signal, solder bridge ic3442 | No closed caption depending on siginal condition. ( dependingon distance of sync and c/c clock) | ||
| SONY |
KV27XBR36
|
No closed caption on air signal, solder bridge ic3442 | No closed caption depending on signal condition. ( depending on distance of sync and c/c clock) | ||
| SONY |
KV32XBR26
|
No closed caption on air signal, solder bridge ic3442 | No closed caption depending on signal condition. ( depending on distance of sync and c/c clock) | ||
| SONY |
KV32XBR36
|
No closed caption on air signal, solder bridge ic3442 | No closed caption depending on signal condition. ( depending on distance of sync and c/c clock) | ||
| SONY |
KV32XBR96
|
No closed caption on air signal, solder bridge ic3442 | No closed caption depending on siginal condition. ( dependingon distance of sync and c/c clock) | ||
| SONY |
CDXR79
|
Switches from tuner to cd at random (replace sw622) | While playing the radio, the unit reverts to cd operation evenif no cd has been inserted. | ||
| SONY |
CDXR77
|
Switches from tuner to cd at random (replace sw622) | While playing the radio, the unit reverts to cd operation evenif no cd has been inserted. |