Sony Repair Tips
Search: sony
Results: 20077
Results: 20077
| Make | Model | Symptom | Problem | Solution | By |
|---|---|---|---|---|---|
| SONY |
CCDF301
|
How to differentiate lens types | There are two lens assemblies in the service manual. how doyou know which one is which? -hq comments: there are two lens types - xe (1-547-422-11) and xf(1-547-412-12). the xe lens has the sheet, f (ref #417) on the top of thelens. the xf has the sheet | ||
| SONY |
SPP300
|
No audio to/from cordless handset- intercom ok - (ic-507) | The unit's handset would not receive or transmit audio to orfrom the outside line. the intercom function worked normally meaning theproblem must be in the base unit. i found pins 11, 12 and 13 of ic507 atvarying voltages causing the output pin 10 to st | ||
| SONY |
KV19TR20
|
Unit shutdown after 30 sec turned on, r568 value change | The unit would go into shutdown after about thirty(30) secondsof operation. | ||
| SONY |
KPR4110
|
Lines on picture & distorted sound, loose gnd screw on e pcb | The unit presented horizontal lines on the picture and distorted sound. | ||
| SONY |
CDPC335
|
No optical pickup functions (resolder cn101 and cn102) | Laser of cdp-c235 would not turn on, no focus, and opticinoperable. there was no +5v on pin 7 of cn101 or pin 5 of cn102. | ||
| SONY |
CDPC900
|
Part # info, optical pickup harnesses (p/n 1-946-072-21) | The part numbers for the harnesses from the pick-up assemblyto the main board cnp101 and cnp102 are missing from the service manual. -hq comments: the national parts center has researched the part numberand informed us that the part number is 1-946-072- | ||
| SONY |
CCDFX310
|
Upper cabinet part number incorrect | The description of the part is not correct - x-3941-666-1 isfor the fx310 and x-3941-211-1 is for the fx311. | ||
| SONY |
CDPC9ESD
|
Part # info, optical pickup harnesses | The part numbers for the harnesses from the pick-up assemblyto the main board cnp101 and cnp102 are missing from the service manual. -hq comments: the national parts center has researched the part numberand informed us that the part number for the harne | ||
| SONY |
SLV700HF
|
Will not load tape: loading gear 306 | When putting the tape in the unit, it would take in tape thena grinding noise would be heard and it would then eject. | ||
| SONY |
SLVR5UC
|
Eating tapes: sub chassis block assy. (303) | Eating tapes when in forward scan and reverse scan. | ||
| SONY |
D20
|
Platter on clv motor warped | Clv motors for the dt24, d2, d40, d11, and d20 are beingreceived by asc's with the disk platters warped. this part is new outof the box. | ||
| SONY |
SLV700HF
|
Squeal in rewind: replace roller post (202) | In rewind mode there is a squeal. | ||
| SONY |
D11
|
Platter on clv motor warped | Clv motors for the dt24, d2, d40, d11, and d20 are beingreceived by asc's with the disk platters warped. this part is new outof the box. | ||
| SONY |
D40
|
Platter on clv motor warped | Clv motors for the dt24, d2, d40, d11, and d20 are beingreceived by asc's with the disk platters warped. this part is new outof the box. | ||
| SONY |
D2
|
Platter on clv motor warped | Clv motors for the dt24, d2, d40, d11, and d20 are beingreceived by asc's with the disk platters warped. this part is new outof the box. | ||
| SONY |
KPR46EX35
|
Ch 0 and 126 show up on display and can not be erased | The original problem was the unit would always come up withchannel 6 when turned on cold. it did not make any difference what theprevious channel was. | ||
| SONY |
KV32TS20
|
Snowy picture, replaced tuner | Picture becomes snowy after 10 minutes of playing. this alsoappears with kv27ts27, kv10ts20, and kv32tw75. | ||
| SONY |
KV32SXR10
|
Dark picture, resoldered dl302 | Picture becomes dark and red intermittently. during the lastsix months, i saw several cases like this. it also occurs on the kv25xbr. -solder: after resoldering dl302, the set worked fine. -hq comments: the y signal is supplied from the delay line dl30 | ||
| SONY |
ITB3
|
No audio from handset speaker - resolder speaker wires | No audio out of handset. opened handset and found connectionson speaker had never been soldered at the factory. the wires werestripped back and put through the holes on the speaker, but no solder hadever been applied to the connections - no even a trac | ||
| SONY |
CCDFX310
|
Wrong left cabinet assembly order | Ordered left cabinet assembly for ccdfx310 which is gray incolor and received a black left cabinet assembly. are the part numbersin the manual for the fx310 and fx311 switched? |