Cce Repair Tips
Search: cce
Results: 4824
Results: 4824
| Make | Model | Symptom | Problem | Solution | By |
|---|---|---|---|---|---|
| CCE |
TL470
|
Image scrolling.... | Alter pal-n to pal-m | André | |
| CCE |
HPS-1497
|
Only tune in to one channel, just change the characters | Zener diode 702 5v6 volts like leakage | Geronimo | |
| CCE |
D3201
|
Sound failing | Change capacitors ec4 and ec18 470x35v | Joao Bosco Sorocaba | |
| CCE |
LN244
|
It doesn't turn on, sometimes the red LED turns on and the green one turns on, without turning on the TV. | Low output voltage | Replacing the 8-pin regulator u4 mp1484en (just replace) | MULTINFORMÁTICA |
| CCE |
STILE D3201
|
Don't care! it only stays on the red LED | Ci u5 1,8v smd na principal | Eletrônica Cecé. Brumadinho MG | |
| CCE |
LT29G
|
The power comes on soon and then it gets dark | Welding with thermal blower at vcon | Ribas | |
| CCE |
C390
|
TV doesn't turn on only on ST BY. | Defective main board, tsound is no 3v voltage on k-1 and k-0, keyboard connector. | U17 reg 7805 replace and ec4 defective electrolytic capacitor 470μF x16v. | RNSPTEC |
| CCE |
CCE STILE D3201
|
TV when turned on locks sound channels failing +b U5/U3 ok direct swap EC1/8/4 EC2/11/12 | Replace cap ec1/8/4 2/11/12 | Paulo Souza | |
| CCE |
HPS 2118 B
|
Low power supply - led off | Zd802 18v was measuring 16v | Replace zener zd802 - 18v | Pardal-X |
| CCE |
TV 2118USP
|
With black bar on the left side of the screen | Ceramic capacitor c234 | It was a show! | Deusdete |
| CCE |
HPS1471
|
Image blurred to the right with black line in the left corner | Put a resistance in sector r 414 of the same value in my case | eletronica publison natal rgn | |
| CCE |
STILE24D
|
Without consumption 5 volts normal with consumption 5 volts pulsing | Diodo zener 18v. (d801) | Cleuso | |
| CCE |
C420
|
No sound, or blocking the sound and robot-like sound | Ec4 | Replace of the same | Airton Filgueira |
| CCE |
HPS2001
|
White screen | Fr 914 | J D M | |
| CCE |
D4201
|
Does not turn on, orange LED | Replace capacitor ec4 | Replace 470x16v | jcgiantomaso |
| CCE |
HPS1471
34BI |
The TV would turn on oscillating normally, but before the image appeared it would simply turn off and the LED would blink. | Loose flyback ferrite. | Put a shim on it or find a way to fix it, or if you prefer, replace the flyback. | Tiago C. Neves |
| CCE |
LT29G
|
Lower LED current | Remove r3 and r6 and place r3 that you took in series with r8, and change r126 from 0 to 10k | With this the voltage dropped to 40v | NEI |
| CCE |
TV-29USP
|
Does not turn on, LED is on | R401 18k, c402 | Marcelo | |
| CCE |
LH42G
|
It has 5v standby but not 12 and 24v | Photo coupler p3 and ci ic3 | Replace both | Eletrônica JJ |
| CCE |
LH42G
|
TV does not turn on, standby LED does not light up. | Poor contact on fats q15 and q16 on the power supply board. | Resolder the aforementioned fets. | Eletrônica Video Color |